Administrator Guide

Switch Management Commands 2315
Default Configuration
This command defaults to 365 days.
Command Mode
Crypto Certificate Generation mode
User Guidelines
This command mode is entered using the crypto certificate generate
command.
Example
The following example displays how specify that a certification is valid for a
duration of 50 days.
console(config-crypto-cert)#duration 50
ip http port
Use the ip http port command to specify the TCP port on which the switch
listens for HTTP connections. To use the default TCP port, use the no form
of this command.
Syntax
ip http port port-number
no ip http port
• port-number — Port number on which the switch HTTP server listens
for connections. (Range: 1025–65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode