Users Guide

Dell EMC Networking CLI 124
MLAG
show keepalive Displays the global loop protect
configuration.
PE
show keepalive statistics Displays the loop protect status for one or all
interfaces.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear vpc statistics Clears the counters for the keepalive
messages transmitted and received by the
MLAG switch.
PE
feature vpc Enables debug traces for the specified
protocols.
GC
feature vpc Globally enables MLAG. GC
peer detection enable
Enables the Dual Control Plane
Detection Protocol.
MD
peer detection interval
Configures the peer detection
transmission interval and the detection
interval.
MD
peer-keepalive destination Enables the Dual Control Plane Detection
Protocol with the configured IP address of
the peer MLAG, the local source address and
the peer timeout value.
MD
peer-keepalive enable Enables the peer keepalive protocol. MD
peer-keepalive timeout Configures the peer keepalive timeout value,
in seconds.
MD
role priority Configures the priority value used on a
switch for primary/secondary role selection.
MD
show vpc Displays information about an MLAG. PE
show vpc brief Displays the MLAG global status. PE
Command Description Mode
a