Users Guide

Dell EMC Networking CLI 135
VLAN
udld port Selects the UDLD operating mode on a specific
interface.
IC
show udld Displays the global settings for UDLD. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
interface vlan Enters the VLAN interface configuration mode. GC
interface range vlan Enters the interface configuration mode to
configure multiple VLANs.
GC
name (VLAN
Configuration)
Configures a name to a VLAN. IC
private-vlan Defines a private VLAN association between
the primary and secondary VLANs.
VC
protocol group Attaches a vlan-id to the protocol-based VLAN
identified by groupid.
VC
protocol vlan group Adds the Ethernet interface to the protocol-
based VLAN identified by groupid.
IC
protocol vlan group all Adds all Ethernet interfaces to the protocol-
based VLAN identified by groupid.
GC
show dot1q-tunnel Displays the QinQ status for each interface. PE
show interfaces switchport Displays switchport configuration. PE or
IC
show port protocol Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
PE
show switchport ethertype Displays the configured Ethertype for each
interface.
PE
show vlan Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
PE
Command Description Mode
a