Users Guide

Dell EMC Networking CLI 144
radius server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius server Specifies a RADIUS server host. GC
radius server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius server source-
interface
Selects the interface from which to use the IP
address in the source IP address field of
transmitted RADIUS packets.
GC
radius server timeout Sets the interval for which a switch waits for a
RADIUS server to reply.
GC
radius server vsa send
authentication
Enables the switch to process during
authentication.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show radius statistics Shows the statistics for an authentication or
accounting server.
UE or
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated RADIUS server.
R
usage Specifies the usage type of the server. R
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a