Users Guide

Dell EMC Networking CLI 146
default mab Configures the switch to transmit EAP, PAP, or
CHAP credentials to the RADIUS server for
MAB-authenticated devices connected to the
interface.
IC
mab request format Configures the format of the MAC address sent
in the User-Name attribute.
IC,
GC
dot1x max-reauth-req Sets the maximum number of times that the
switch sends Extensible Authentication
Protocol EAP-Request/Identity frames to which
no response is received before restarting the
authentication process.
IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
dot1x max-users Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
IC
dot1x port-control Enables manual control of the authorization
state of the port.
IC
dot1x re-authenticate Manually initiates a reauthentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
PE
dot1x reauthentication Enables periodic reauthentication of the client. IC
dot1x system-auth-control
monitor
Enables 802.1X globally. GC
dot1x timeout guest-vlan-
period
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
IC
dot1x timeout quiet-period Sets the number of seconds the switch remains
in the quiet state following a failed
authentication attempt.
IC
dot1x timeout re-authperiod Sets the number of seconds between
reauthentication attempts.
IC
Command Description Mode
a