Users Guide

Layer 3 Routing Commands 1546
Unique Next Hops (High)........................ 68 (132)
Next Hop Groups (High)......................... 299 (599)
ECMP Groups (High)............................. 290 (585)
ECMP Routes.................................... 256
Truncated ECMP Routes.......................... 34
ECMP Retries................................... 26400
Routes with 1 Next Hop......................... 34
Routes with 2 Next Hops........................ 285
Routes with 3 Next Hops........................ 5
show ip traffic
Use the show ip traffic command to display IP statistical information of the
software IP stack. Refer to RFC 1213 for more information about the fields
that are displayed.
Syntax
show ip traffic [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command displays statistics for the software IP stack, not the hardware
routing information.
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.