Users Guide

Layer 3 Routing Commands 1629
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip pim boundary all
MULTICAST BOUNDARY
Interface Group IP Mask
-------- ------ ---------------
show ip multicast interface
Use the show ip multicast interface command to display the multicast
information for the specified interface.
Syntax
show ip multicast interface [type number]
• type number—Interface type and number for which to display IP
multicast information. VLAN Vlan-ID is the only supported type and
number.
Default Configuration
Show information for all multicast interfaces.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes