Users Guide

Switch Management Commands 2278
show system id
Use the show system id command to display the system identity information.
Syntax
show system id [unit]
• unit — The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
The tag information is on a switch by switch basis.
Example
The following example displays the system service tag information.
console#show system id
Service Tag: at-N3024-X00-0010
Serial Number: sn-a128
Asset Tag:
Unit Service tag Serial number Asset tag
---- ------------ -------------- ------------
1 at-N3024-X00-0010 sn-a128
show system power
Use the show system power command to display information about the
system level power consumption.
Syntax
show system power