Users Guide

Security Commands 1020
console(config-auth-radius)#no name
primary
Use the primary command to specify that a configured server should be the
primary server in a server group.
Syntax
primary
Default Configuration
There is no primary authentication server by default.
Command Mode
RADIUS Server Configuration mode
User Guidelines
Multiple primary servers can be configured for each server group. When the
RADIUS client has to perform transactions with an authenticating RADIUS
server of the specified group, it uses the primary server(s) first. If it fails to
communicate with the primary server(s) for any reason, it uses the secondary
servers configured within the group.
Example
console(Config-auth-radius)#primary
priority
Use the priority command in RADIUS Server Configuration mode to specify
the order in which the servers are to be used, with 0 being the highest priority.
Syntax
priority priority
• priority — Sets server priority level. (Range 0-65535)