Users Guide

Security Commands 1053
User Guidelines
The administrator must enter the auth or acct mode corresponding to a
specific RADIUS server before executing this command. This command has
no effect on accounting servers.
Use this command to restrict the types of authentication sent to a particular
RADIUS server. The login selection restricts authentication requests to
switch administrator logins. The authmgr setting restricts authentication
requests to 802.1x and MAB authentications.
Command History
Syntax updated in version 6.6 firmware.
Example
The following example specifies usage type login, i.e. switch administrator
login authentications.
console(config)#radius server host 192.143.120.123
console(config-auth-radius)#usage login