Users Guide

Security Commands 1096
The following shows example CLI display output for the statistics.
console #show dot1x statistics gi1/0/1
Port........................................... Gi1/0/1
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Transmitted................. 3
EAPOL Logoff Frames Received................... 0
EAP Resp/Id frames transmitted................. 0
EAP Response frames transmitted................ 0
EAP Req/Id frames transmitted.................. 0
EAP Req frames transmitted..................... 0
Invalid EAPOL frames received.................. 0
EAP length error frames received............... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 00:00:00:00:02:01
show authentication authentication-history
Use the show authentication authentication-history command to display the
dot1x authentication events and information during successful and
unsuccessful dot1x authentication processes. The command is available to
display all events, or events per interface, or only failure authentication events
in summary or in detail.
Syntax
show authentication authentication-history {interface-id | all} [failed-auth-
only] [detail]
• interface-id— Any valid interface. See Interface Naming Conventions for
interface representation.
• all—All interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes