Users Guide

Security Commands 1100
Command History
Command syntax show dot1x clients deprecated in favor of show
authentication clients in version 6.6 firmware.
Example
The following examples show the output for both forms of the command.
Only a single client is authenticated on the switch.
console#show authentication clients all
Interface MAC-Address Method Host Mode Control Mode VLAN
Assigned Reason
--------- ----------------- ------- ------------ ------------ ---------
-----------------
0/16 10:8D:B6:C6:00:00 802.1X multi-host auto RADIUS
Assigned VLAN (10)
console#show authentication clients interface gi1/0/2
Mac Address.................................... 58:05:94:1C:00:00
User Name...................................... testixia
VLAN Assigned Reason........................... Voice VLAN (100)
Host Mode ..................................... multi-auth
Method......................................... 802.1X
Control Mode................................... auto
Session time ... .............................. 0
Session timeout ............................... 0
Session Termination Action..................... Default
Filter-Id ..................................... None
DACL........................................... None
Session Termination Action..................... Default
Acct SessionId:................................ test:200000003
Filter ID Identifies the Filter ID returned by the RADIUS server
when the client was authenticated. This is a configured
DiffServ policy name on the switch.
DACL Identifies the Downloadable ACL returned by the
RADIUS server when the client was authenticated.
Acct Session ID The Accounting Session ID associated with the client
session.
Field Description