Users Guide

Security Commands 1108
User Guidelines
The unauthenticated VLAN is the VLAN to which supplicants that fail
802.1x authentication are assigned. By default, the switch will retry
authentication one time before assigning a user to the unauthenticated
VLAN. Configure the unauthenticated VLAN before using this command.
Command History
Syntax updated in version 6.6 firmware.
Example
The following example sets the unauthenticated VLAN on Gi1/0/21/0/2 to
VLAN 20.
console(config-if-Gi1/0/2)# authentication event fail action authorize vlan 20
show dot1x advanced
Use the show dot1x advanced command to display 802.1x advanced features
for the switch or for the specified interface.
Syntax
show dot1x advanced [{gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes