Users Guide

Layer 3 Routing Commands 1363
Command History
Introduced in version 6.2.0.1 firmware.
Modified in version 6.3.0.1 firmware.
Example
console#show bgp ipv6 neighbors 1010:10::103 routes
Local router ID is 0.0.0.101
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- ------
1010:10::/64 1010:10::103 0 65001 i
2020:20::/64 1010:10::103 0 65001 i
console#show bgp ipv6 neighbors fe80::21e:c9ff:fede:b51a interface vlan 10
received-routes
Local router ID is 0.0.0.101
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- ------
1010:10::/64 1010:10::103 0 65001 i
2020:20::/64 1010:10::103 0 65001 i
show bgp ipv6 statistics
Use this command to display statistics for the IPv6 decision process. This
command deprecates and replaces the show ipv6 bgp statistics command.
Syntax
show bgp ipv6 statistics
Default Configuration
There is no default configuration for this command.
Origin The value of the Origin attribute as received from the
peer.