Users Guide

Layer 3 Routing Commands 1374
show ip bgp aggregate-address
Use the show ip bgp aggregate-address command to list the aggregate
addresses that have been configured and indicates whether each is currently
active.
Syntax
show ip bgp [vrf vrf-name] aggregate-address
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
Privileged Exec mode, Global Configuration mode, and all sub-modes.
User Guidelines
If the vrf argument is specified, information pertaining to that VRF is
displayed.
The following fields are displayed.
Command History
Introduced in version 6.2.0.1 firmware. Updated in 6.3.0.1 firmware.
Field Description
Prefix/Len Destination prefix and length
AS Set Indicates whether an empty AS path is advertised with
the aggregate address (N) or an AS SET is advertised
with the set of AS numbers for the paths contributing to
the aggregate (Y).
Summary Only Indicates whether the individual networks are
suppressed (Y) or advertised (N).
Active Indicates whether the aggregate is currently being
advertised.