Users Guide

Layer 3 Routing Commands 1398
Example
console#show ip bgp template
Template Name AF Configuration
------------- ---- -----------------------------
peer-grp1 timers 5 15
password rivendell
IPv4 advertisement-interval 15
peer-grp2 IPv4 prefix-list strider in
IPv4 maximum-prefix 100
IPv6 prefix-list gandolf in
IPv6 maximum-prefix 200
peer-grp3 IPv6 send-community
peer-grp4 update-source loopback 0
IPv4 next-hop-self
show ip bgp traffic
The show ip bgp traffic command list the routes that are allowed by the
specified community list.
Syntax
show ip bgp [vrf vrf-name] traffic
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
sub-modes.
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.