Users Guide

Dell EMC Networking CLI 160
ip bgp-community new-
format
Displays BGP standard communities in AA:NN
format.
GC
ip bgp fast-external-fallover Configures fast external failover behavior for a
specific routing interface.
IC
ip community-list Creates or configures a BGP community list. GC
ip extcommunity-list Creates an extended community list to
configure VRF route filtering.
GC
match extcommunity Matches BGP extended community list
attributes.
RM
maximum-paths (BGP
Router Configuration)
Specifies the maximum number of next hops
BGP may include in an Equal Cost Multipath
(ECMP) route derived from paths received
from neighbors outside the local autonomous
system.
BR
maximum-paths (IPv6
Address Family
Configuration)
Limits the number of ECMP next hops in IPv6
routes from external peers.
IPAF
maximum-paths ibgp (BGP
Router Configuration)
Specifies the maximum number of next hops
BGP may include in an Equal Cost Multipath
(ECMP) route derived from paths received
from neighbors within the local autonomous
system.
BR
maximum-paths ibgp (IPv6
Address Family
Configuration)
Limits the number of ECMP next hops in IPv6
routes from internal peers.
IPAF
neighbor activate Enables the exchange of IPv6 routes with a
neighbor.
IPAF,
IPAF4
neighbor advertisement-
interval (BGP Router
Configuration)
Configures the minimum time that must elapse
between advertisements of the same route to a
given neighbor.
BR
neighbor advertisement-
interval (IPv6 Address
Family Configuration)
Controls the time between sending Update
messages containing IPv6 routes.
IPAF
neighbor allowas-in Configures BGP to accept prefixes even if the
local ASN is part of the AS_PATH.
BR
Command Description Mode
a