Users Guide

Dell EMC Networking CLI 194
IPv6 Policy-Based Routing
show ipv6 ospf interface
vlan
Displays OSPFv3 configuration and status
information for a specific VLAN.
PE
show ipv6 ospf neighbor Displays information about OSPF neighbors. PE
show ipv6 ospf range Displays information about the area ranges for
the specified area identifier.
PE
show ipv6 ospf stub table Displays the OSPF stub table. PE
show ipv6 ospf virtual-
links
Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ipv6 ospf virtual-
link brief
Displays the OSPFV3 Virtual Interface
information for all areas in the system.
PE
timers throttle spf Throttles the link-state-packets. OR
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
ipv6 policy route-map Identifies a route map to use for policy-
based IPv6 routing on an interface.
IC
match ipv6 address Specifies an IPv6 address match criteria
for a route map.
RM
set ipv6 next-hop
Specifies an adjacent next-hop router in
the path toward the destination to which
the packets should be forwarded.
RM
set ipv6 default next-hop
Specifies an adjacent default next-hop
router in the path toward the destination
to which the packets should be forwarded.
RM
set ipv6 precedence
Specifies the precedence in the IPv6
packet header in the path toward the
destination to which the packets should
be forwarded.
RM
show ipv6 policy Shows which IPv6 policy route maps are
configured on an interface.
PE, GC
Command Description Mode
a