Users Guide

Switch Management Commands 2063
console(config)#line telnet
console(config-line)#
login authentication
Use the login authentication command in Line Configuration mode to
specify the login authentication method list for a line (console, telnet, or
SSH). To return to the default specified by the authentication login
command, use the no form of this command.
Syntax
login authentication {default | list-name}
no login authentication
• default — Uses the default list created with the aaa authentication
login command.
• list-name — Uses the indicated list created with the aaa authentication
login command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method for a
console.
console(config)# line console
console(config-line)# login authentication default