Users Guide

Switch Management Commands 2132
packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the “no” form of this command
to disable MLD tracing.
Syntax
debug ipv6 mld packet [receive | transmit]
no debug ipv6 mld packet [receive | transmit]
Default Configuration
Display of MLD traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ipv6 mld packet
debug ipv6 ospfv3 packet
Use the debug ipv6 ospfv3 packet command to enable debug tracing of IPv6
OSPFv3 packets.
Syntax
debug ipv6 ospfv3 packet
no debug ipv6 ospfv3 packet
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode.