Users Guide

Dell EMC Networking CLI 219
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
show process proc-list Lists the configured and in-use resources for
each application known to the Process Manager.
PE or GC
show sessions Displays a list of the open console sessions. PE
show slot Displays information about all the slots in the
system or for a specific slot.
UE
show supported cardtype Displays information about all card types
supported in the system.
UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system fan Explicitly displays the fan status. UE or PE
show system id Displays the service ID information. UE
show system power Displays information about the system level
power consumption.
UE or PE
show system
temperature
Displays information about the system
temperature and fan status.
UE or PE
show tech-support Displays system and configuration information
(for debugging/calls to technical support).
PE
show users Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
PE
show version Displays the system version information. UE
stack Sets the mode to Stack Configuration mode. GC
stack-port Sets the mode to Stack Configuration mode to
configure Stack ports as either Stacking ports or
as Ethernet ports.
GC
stack-port shutdown Enables or disable the stack port
administratively.
SC
Command Description Mode
a