Users Guide

Switch Management Commands 2296
show router-capability
Use this command to display the router capabilities of the loaded firmware
image.
Syntax
show router-capability
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
The capabilities in the switch firmware are determined during the build
process.
Command History
Introduced in version 6.3.0.1 firmware. Updated in version 6.5 firmware.
Examples
This example displays the capabilities of an N3000-ONv6.5.x.x firmware
build.
console# show router-capability
This firmware supports a stack of up to twelve switches. MVRP/MMRP
capabilities and up to 4093 VLANs may be configured.
This example displays the capabilities of an N3000-ONBGPv6.3.x.x firmware
mixed stacking build.
console#show router-capability
This firmware supports a stack of up to eight switches. MVRP/MMRP
capabilities are not available.
show sessions
Use the show sessions command to display a list of the open sessions from
remote hosts.