Users Guide

Switch Management Commands 2304
show switch stack–ports
show switch stack–ports counters { all | <unit>}
show switch stack–ports diag {all | <unit> } { verbose }
show switch stack–ports stack-path {all | from-unit to-unit }
• unit—The stack member number.
• stack–ports—Display summary stack-port information for all units.
• counters—Display summary data counter information for all units.
• diag—Display stacking diagnostics for each unit.
• stack-path—Display the active path from one stacking unit to another.
• From-unit—The first unit to be listed.
• all—Displays all unit paths.
• To-unit—The last unit to be listed.
• stack–standby—Display the configured or automatically selected
standby unit number.
• verbose—Display detailed information.
Default Configuration
By default, the information for all units is displayed.
Command Mode
User Exec, Privileged Exec, Global Configuration mode and all Configuration
submodes
User Guidelines
The show switch command shows the configuration and status of the
stacking units, including the active and standby stack management units, the
pre-configured model identifier, the plugged in model identifier, the switch
status and the current code version. Both the pre-configured switch types (as
set by the member command in stack mode) and the currently connected
switchtypes, if any, are shown.