Users Guide

Layer 2 Switching Commands 298
console#show ipv6 access-lists
Current number of ACLs: 4 Maximum number of ACLs: 100
IPv6 ACL Name Rules Count Interface(s) Direction
---------------------- ------ ----- ------------ ---------
IPV6-DACL-IN-Gi1/0/9#d 1 246 Gi1/0/9 Inbound
IPV6-VDACL-IN-Gi1/0/9#d 1 0 Gi1/0/9 Inbound
Display with the ACL name for any of the above (no #d required in
command):
console#show ip access-lists IP-DACL-IN-Gi1/0/9
IP ACL Name: IP-DACL-IN-Gi1/0/9#d
Inbound Interface(s):
Gi1/0/9
Rule Number: 50
Action......................................... permit
Match All...................................... TRUE
ACL Hit Count.................................. 418
show mac access-lists
Use the show mac access-lists command to display a MAC access list and all
the rules that are defined for the MAC ACL. Use the [name] parameter to
identify a specific MAC ACL to display.
Syntax
show mac access-lists name
• name—Use this parameter to identify the specific MAC ACL to display.
Default Configuration
This command has no default configuration
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes