Users Guide

Layer 2 Switching Commands 390
IP Address Validation................. Disabled
VLAN Configuration Log Invalid ACL Name Static flag
---- ------------- ----------- -------------------------------- ----------
1 Disabled Enabled
Following is an example of the show ip arp inspection interfaces command.
console#show ip arp inspection interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
Gi1/0/1 Untrusted 15 1
Gi1/0/2 Untrusted 10 10
Following is an example of the show ip arp inspection statistics command.
console#show ip arp inspection statistics
VLAN Forwarded Dropped
---- --------- -------
10 90 14
20 10 3
console#show ip arp inspection statistics vlan 10,20
VLAN DHCP ACL DHCP ACL Bad Src Bad Dest Invalid
Drops Drops Permits Permits MAC MAC IP
---- ---------- ---------- ---------- ---------- ---------- ---------- ------
10 11 1 65 25 1 1 0
20 1 0 8 2 0 1 1
The following global parameters are displayed when no parameters are given:
The following fields are displayed for each VLAN:
Parameter Description
Source Mac Validation If Source Mac validation of ARP frame is enabled.
Destination Mac
Validation
If Destination Mac validation of ARP Response frame is
enabled.
IP Address Validation If IP address validation of ARP frame is enabled.