Users Guide

Layer 2 Switching Commands 474
console (config)# ethernet ring g8032 ring1
console (config-erp-ring1)#port0 interface te1/0/1
console (config-erp-ring1)#port1 interface te1/0/2
console (config-erp-ring1)#instance 1
console (config-erp-inst-1)#rpl port1 owner
console (config-erp-inst-1)#inclusion-list vlan-ids 101-103
console (config-erp-inst-1)#aps-channel
console (config-erp-inst-1-aps)#level 7
console (config-erp-inst-1-aps)#raps-vlan 100
Command History
Command introduced in firmware release 6.6.1.
g8032
Use the g8032 command for controlling protection switching transitions and
faults manually.
Syntax
g8032 command {forced | manual} ring-name instance instance-id {port0 |
port1}
g8032 command clear ring-name instance instance-id
• ring-name —The name of an Ethernet ring to be configured (up to 32
characters).
• port0 —The East port.
• port1 —The West port.
• instance-id —The ID of the protection instance. Range is 1 to 2.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command can perform the following operations: clear, forced switch and
manual switch.