Users Guide

Layer 2 Switching Commands 511
User Guidelines
This command is valid for Ethernet and port-channel interfaces. If no
interface-id parameter is given, all interfaces are shown.
Example
The following example shows how to display GVRP configuration
information:
console# show gvrp configuration
Global GVRP Mode: Disabled
Join Leave LeaveAll Port VLAN
Interface Timer Timer Timer GVRP Mode Create Register
(centisecs) (centisecs) (centisecs) Forbid Forbid
----------- ----------- ----------- ----------- ----------- ------ ------
Gi1/0/1 20 60 1000 Disabled
Gi1/0/2 20 60 1000 Disabled
Gi1/0/3 20 60 1000 Disabled
Gi1/0/4 20 60 1000 Disabled
Gi1/0/5 20 60 1000 Disabled
Gi1/0/6 20 60 1000 Disabled
Gi1/0/7 20 60 1000 Disabled
Gi1/0/8 20 60 1000 Disabled
Gi1/0/9 20 60 1000 Disabled
Gi1/0/10 20 60 1000 Disabled
Gi1/0/11 20 60 1000 Disabled
Gi1/0/12 20 60 1000 Disabled
Gi1/0/13 20 60 1000 Disabled
Gi1/0/14 20 60 1000 Disabled
show gvrp error-statistics
Use the show gvrp error-statistics command in User Exec mode to display
GVRP error statistics.
Syntax
show gvrp error-statistics [interface-id]
• interface-id—An Ethernet interface identifier or a port channel interface
identifier.
Default Configuration
This command has no default configuration.