Users Guide

Layer 2 Switching Commands 616
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
Gi1/0/1 Up Enabled Enabled Enabled 0,1,2,4 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capabilities, 4-Port VLAN
show lldp local-device
Use the show lldp local-device command to display the advertised LLDP
local data. This command can display summary information or detail for each
interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail — includes a detailed version of the local data.
• interface — Specifies a valid Ethernet interface on the device. Specify
either gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port
or fortygigabitethernet unit/slot/port.
• all — Shows lldp local device information on all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
These examples show advertised LLDP local data in two levels of detail.
console#show lldp local-device all
LLDP Local Device Summary
Interface Port ID Port Description
--------- -------------------- --------------------
Gi1/0/1 Gi1/0/1