Users Guide

Layer 2 Switching Commands 659
Command Mode
Global Configuration
User Guidelines
The following table lists the completion messages.
Example
console(config)#mvr
console(config)#mvr group 239.0.1.0 31
console(config)#mvr vlan 10
mvr mode
Use the mvr mode command in Global Configuration mode to change the
MVR mode type. Use the no form of the command to set the mode type to
the default value.
Syntax
mvr mode {compatible | dynamic}
no mvr mode
• compatible—Do not allow membership joins on source ports.
• dynamic—Send IGMP joins to the multicast source when IGMP joins are
received on receiver ports.
Default Configuration
The default mode is compatible.
Command Mode
Global Configuration
Message Type Message Description
Successful Completion Message None
Error Completion Message
• Not an IP multicast group address
• Illegal IP multicast group address