Users Guide

Security Commands 988
logging email
Use the logging email command in Global Configuration mode to enable e-
mail alerting and set the lowest severity level for which log messages are e-
mailed. Use the no form of the command to disable e-mail alerting.
Syntax
logging email [severity]
no logging email
• severity—If you specify a severity level, log messages at or above the
severity level are e-mailed. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords, and the
numeric severity level each represents, are as follows.
– emergency (0)
– alert (1)
– critical (2)
– error (3)
– warning (4)
– notice (5)
– info (6)
– debug (7)
Default Configuration
E-mail alerting is disabled by default. When e-mail alerting is enabled, log
messages at or above severity Warning are e-mailed.
Command Mode
Global Configuration mode
User Guidelines
The logging email command with no arguments enables e-mail alerting.
Specify a severity to set the severity level of log messages that are e-mailed in
a non-urgent manner. Log messages at or above this severity level, but below
the urgent severity level, are collected together until the log time expires (the