Users Guide
Security Commands 989
time specified in the
logging email logtime
command) and then e-mailed in a
single e-mail message. If you set the non-urgent severity level to the same
value as the urgent severity level, then no log messages are e-mailed non-
urgently. See the
logging email urgent
command to specify the urgent severity
level. The command no logging email disables all e-mail alerting.
logging email urgent
Use the logging email urgent command in Global Configuration mode to set
the lowest severity level at which log messages are e-mailed in an urgent
manner. To revert the urgent severity level to its default value, use the no
form of this command.
Syntax
logging email urgent {severity | none}
no logging email urgent
• severity—If you specify a severity level, log messages at or above the
severity level are e-mailed. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords, and the
numeric severity level each represents, are as follows.
– emergency (0)
– alert (1)
– critical (2)
– error (3)
– warning (4)
– notice (5)
– info (6)
– debug (7)
• none—
If you specify this keyword, no log messages are e-mailed urgently. All log
messages at or above the non-urgent level (configured with the logging email
command) are e-mailed in batch.
Default Configuration
The default severity level is alert.