Users Guide

Security Commands 1179
Syntax
dos-control tcpflag
no dos-control tcpflag
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example activates TCP Flag Denial of Service protections.
console(config)#dos-control tcpflag
dos-control tcpfrag
Use the dos-control tcpfrag command in Global Configuration mode to
enable TCP Fragment Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress
having IP Fragment Offset equal to one (1), the packets are dropped.
Syntax
dos-control tcpfrag
no dos-control tcpfrag
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode