Users Guide

Layer 3 Routing Commands 1409
Command History
Introduced in version 6.2.0.1 firmware.
Example
console# show ip bgp
BGP table version is 5, local router ID is 20.1.1.1
Status codes: s suppressed, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Path Origin
*> 172.20.1.0/24 100.10.1.1 10 100 20 10 i
200.10.1.1
*> 172.20.2.0/24 100.10.1.1 10 100 20 10 ?
Field Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
Status codes • s—The route is aggregated into an aggregate address
configured with the summary-only option
• *—Dell EMC Networking BGP never displays invalid
routes; so this code is always displayed (to maintain
consistency with the industry standard)
• >—Indicates that BGP has selected this path as the
best path to the destination
•
i—If the route is learned from an internal peer
Network Destination prefix
Next Hop The route’s BGP next hop
Metric Multi-Exit Discriminator
LocPrf The local preference
Path The AS path
Origin The value of the Origin attribute