Users Guide

Layer 3 Routing Commands 1413
Example
console(config)#show ip bgp community-list test
BGP table version is 0, local router ID is 65.1.1.1
Status Codes: s suppressed, * valid, > best, i - internal
Origin Codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------ --------------- ---------- --------- ------------- ------
show ip bgp extcommunity-list
Use the show ip bgp extcommunity-list command to display all the permit
and deny attributes of the given extended community list. If the
list-number
is specified, the output is displayed that matches the given
list-number ; else
all the lists are displayed.
Syntax
show ip bgp extcommunity-list list-number
• list-number — A standard extended community list number (0 to 99).
Default Configuration
No extended community lists are configured by default.
Command Mode
Privileged Exec and Global Config modes
User Guidelines
The following fields are displayed.
Field Description
Standard extended
community-list
The standard named extended community list.
permit Permits access for a matching condition. Once a permit
value has been configured to match a given set of
extended communities the extended community list
defaults to an implicit deny for all other values.