Users Guide

Layer 3 Routing Commands 1422
Established Time .............................. 0 days 00 hrs 00 mins 10
secs
show ip bgp neighbors advertised-routes
The show ip bgp neighbors advertised-routes command displays the list of
routes advertised to a specific neighbor. These are the routes in the adjacent
RIB out for the neighbor’s outbound update group
Syntax
show ip bgp [vrf vrf-name ] neighbors ip-address advertised-routes
•
ip-address —The IPv4 address of a neighbor.
• vrf
vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
Privileged Exec mode, Global Configuration mode, and all sub-modes
User Guidelines
Note that this output differs slightly from the output in show ip bgp.
Suppressed routes and non-best routes are not advertised; so these status
codes are not relevant here. Advertised routes always have a single next hop,
the BGP NEXT HOP advertised to the peer. Local preference is never sent to
external peers.
If the
vrf-name argument is specified, information pertaining to that VRF is
displayed.
The output indicates whether BGP is configured to originate a default route
to this peer (neighbor default-originate).
Counters Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.