Users Guide

Dell EMC Networking CLI 143
Security Commands
AAA
Command Description Mode
a
aaa accounting Creates an accounting method list GC
aaa accounting delay-start Delays the sending of Acct-Start packets to
RADIUS accounting server(s)
GC
aaa accounting update Enables the sending of interim accounting
packets to RADIUS accounting server(s).
GC
aaa authentication dot1x
default
Specifies an authentication method for 802.1x
clients.
GC
aaa authentication enable Defines authentication method lists for
accessing higher privilege levels.
GC
aaa authentication login Defines login authentication. GC
aaa authorization Creates an authorization method list. GC
aaa authorization network
default radius
Enables the switch to accept VLAN assignment
by the RADIUS server.
GC
aaa ias-user username Configures IAS users and their attributes. Also
changes the mode to aa user Configuration
mode.
GC
aaa new-model This command is a no-op command. It is
present only for compatibility purposes.
GC
aaa server radius dynamic-
author
Enters radius dynamic authorization mode. GC
authentication command Disables processing of RADIUS CoA requests
to bounce the host port.
GC
authentication control-
direction
Controls traffic flow for 801.2X
unauthenticated interfaces.
IC
authentication critical
recovery
Controls the load placed on RADIUS servers. GC
authentication dynamic-
vlan enable
Enables the switch to create VLANs
dynamically when a RADIUS–assigned VLAN
does not exist in the switch.
GC