Users Guide

150 Dell EMC Networking CLI
radius server attribute 168 Enables the switch to send the RADIUS
Framed-IPv6-Address attribute in accounting
messages sent to the RADIUS accounting
server.
GC
radius server dead-criteria Configures the condition upon which a
RADIUS server is considered unreachable
(dead).
GC
radius server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius server Specifies a RADIUS server host. GC
radius server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius server load-balance Enables load balancing within RADIUS server
lists.
GC
radius server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius server source-
interface
Selects the interface from which to use the IP
address in the source IP address field of
transmitted RADIUS packets.
GC
radius server timeout Sets the interval for which a switch waits for a
RADIUS server to reply.
GC
radius server vsa send
authentication
Enables the switch to process during
authentication.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
Command Description Mode
a