Users Guide

Layer 3 Routing Commands 1590
• burst-interval — How often the token bucket is initialized (Range:
0–2147483647 milliseconds).
•
burst-size — The maximum number of messages that can be sent during a
burst interval (Range: 1–200).
Default Configuration
Rate limiting is enabled by default.
The default burst-interval is 1000 milliseconds.
The default burst-size is 100 messages.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 icmp error-interval 2000 20
ipv6 mld last-member-query-count
The ipv6 mld last-member-query-count command sets the number of
listener-specific queries sent before the router assumes that there are no local
members on the interface. Use the “no” form of this command to set the last
member query count to the default.
Syntax
ipv6 mld last-member-query-count last-member-query-count
no ipv6 mld last-member-query-count
•
last-member-query-count — Query count (Range: 1–20).
Default Configuration
The default last member query count is 2.