Users Guide

Layer 3 Routing Commands 1864
Example
The following example displays the OSPF Virtual Interface information for
area 1 and its neighbor.
console#show ipv6 ospf virtual-link 1 1.1.1.1
Area ID........................................ 1
Neighbor Router ID............................. 1.1.1.1
Hello Interval................................. 10
Dead Interval.................................. 40
Iftransit Delay Interval....................... 1
Retransmit Interval............................ 5
State.......................................... point-to-point
Metric......................................... 10
Neighbor State................................. Full
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
show ipv6 ospf virtual-link brief
Use the show ipv6 ospf virtual-link brief command to display the OSPFV3
Virtual Interface information for all areas in the system.
Syntax
show ipv6 ospf virtual-link [vrf vrf-name ] brief
•
vrf-name — The name of an existing VRF instance.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes, VRF Configuration
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.