Users Guide

Switch Management Commands 2005
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
When copying files from the switch, match a source URL with a destination
URL. URLs may not exceed 160 characters in length, including filename, file
path, hostname, ip address, user, and reserved keywords. When copying
firmware onto the switch in a stacked configuration, use the show sfs and
show version commands to check the status of stack firmware
synchronization prior to a reboot.
active|backup Represents the software image file. When “backup” is the target of
a copy command, it refers to the backup image. When “active” is
the source of a copy command, it refers to the active image. If the
switch is the destination, the file will be distributed to all units in
the stack.
ftp: Source or destination URL for an FTP network server. The syntax
for this alias is ftp:
//ipaddr/filepath/filename image .
tftp: Source or destination URL for a TFTP network server. The syntax
for this alias is tftp:
[[ //location ] /directory ] /filename . An out-of-
band IP address can be specified as described in the User
Guidelines.
usb: Source or destination URL for a file on a mounted USB file
system.
flash: Source or destination URL for the switch flash-based file system.
backup-config Represents the backup configuration file.
unit Indicates which unit in the stack is the target of the copy
command.
Reserved
Keyword
Description