Users Guide

Dell EMC Networking CLI 201
Router Discovery Protocol
match ipv6 address Specifies an IPv6 address match criteria
for a route map.
RM
set ipv6 next-hop
Specifies an adjacent next-hop router in
the path toward the destination to which
the packets should be forwarded.
RM
set ipv6 default next-hop
Specifies an adjacent default next-hop
router in the path toward the destination
to which the packets should be forwarded.
RM
set ipv6 precedence
Specifies the precedence in the IPv6
packet header in the path toward the
destination to which the packets should
be forwarded.
RM
show ipv6 policy
Shows which IPv6 policy route maps are
configured on an interface.
PE, GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
encapsulation Enables Router Discovery on an interface. IC
ip irdp holdtime Configures the value, in seconds, of the hold-
time field of the router advertisement sent from
this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp multicast Sends router advertisements as IP multicast
packets.
IC
ip irdp preference Configures the preference of the address as a
default router address relative to other router
addresses on the same subnet.
IC
Command Description Mode
a