Users Guide

Switch Management Commands 2123
User Guidelines
The confidentiality offset allows multiple point-to-point services to operate
over a link by transmitting the VLAN tag and other information, such as CoS,
in the clear.
Both link partners must support the confidentiality offset capability and the
offset must be configured identically.
Command History
Command introduced in version 6.7.0 firmware.
key chain
Use this command to configure or modify a key chain and enter Key Chain
Configuration mode. Use the no form of the command to remove the key
chain configuration.
Syntax
key chain key-chain-name
no key chain key-key-chain-name
• key-chain-name — The alphanumeric identifier of the key chain. The
maximum length is 16 characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Key Chain Configuration mode allows the administrator to configure a key
chain using the key command. Multiple keys may be configured in a key
chain.
The parameter key-chain-name can be 1 to 16 characters in length. Executing
this command takes the user to Key Chain Configuration mode.