Users Guide

Using the CLI 261
ERSPAN
Destination
Session
Configuration
From Global
Configuration
mode, use the
monitor session
type erspan-
destination
command to
configure an
ERSPAN
destination session.
Switch (config-erspan-src)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
ERSPAN Configuration Modes
ERSPAN
Destination
Source
Configuration
From ERSPAN
Source
Configuration
mode, use the
destination
command to enter
destination
configuration mode
on the source
session switch.
Switch (config-erspan-src-
dst)#
To exit to
ERSPAN Source
Configuration
mode, use the
exit command.
ERSPAN Source
Destination
Configuration
From ERSPAN
Source Destination
Configuration
mode, use the
destination
interface command
to configure the
destination
interface on a
destination switch.
Switch (config-erspan-dst)#
To exit to
ERSPAN Source
Destination
Configuration
mode, use the
exit command.
Interface Configuration Modes
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode