Users Guide

Layer 2 Switching Commands 433
show interfaces debounce
Use the show interfaces debounce command to list the debounce
information for one or multiple interfaces. If no parameter is given, all
Ethernet interfaces are shown.
Syntax
show interfaces debounce [ interface-id ]
•
interface-id —An Ethernet interface identifier (i.e., a 1G, 10G, or 40G
Ethernet interface) in standard interface format.
Default Configuration
Ethernet interfaces have a 100 ms debounce time enabled.
Command Mode
Exec mode, Privileged Exec, Global Configuration and all show modes.
User Guidelines
Use the link debounce time command to configure the debounce time for an
interface.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example shows the output for representative interfaces.
console#show interfaces debounce
Interface Debounce Time (ms) Flaps
--------- ------------------ -------
Gi1/0/1 500 0
show interfaces description
Use the show interfaces description command in User Exec mode to display
the description for all configured interfaces.