Users Guide

Layer 2 Switching Commands 467
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
Refer to IEEE 802.1ag for an explanation of the maintenance association
level and MEP ID. Typically, these are assigned by the top level network
service provider.
• MPID—The maintenance endpointoint identifier
• Level—The MEP level
• Type—Maintenance endpoint (MEP) or maintenance intermediate point
(MIP)
• VLAN—The configured VLAN id
• Port—The port on which the MEP association is configured
• Direction—(Up)stream or (Do)wnstream
• CC Transmit—Continuity check enabled
• MEP-Active—The MEP administrative status
• Operational Status—The MEP operational status
• MAC—The MAC address associated with the MEP.
Example
show ethernet cfm maintenance-points local level 1
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
MPID Level Type VLAN Port Dire- CC MEP- Operational MAC
ction Transmit Active Status
---- ----- ---- ---- ------ ----- -------- ------ ----------- -----
1 1 MEP 10 Gi1/0/1 UP Enabled True 00:02:bc:02:02:02
----- ---- ------ -----------------
Level Type Port MAC
----- ---- ------ -----------------