Users Guide

Layer 2 Switching Commands 507
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces based upon the argument.
Syntax
clear green-mode statistics { interface-id | all}
•
interface-id —An Ethernet interface identifier. See Interface Naming
Conventions for interface representation.
• all—All Ethernet interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
green-mode eee-lpi-history
Use the green-mode eee-lpi-history command in Global Configuration mode
to configure the Global EEE LPI history collection interval and buffer size.
Syntax
green-mode eee-lpi-history {sampling-interval 30 sec – 36000 sec | max-
samples
1 - 168 }
• sampling-interval—The interval in seconds at which power consumption
data needs to be collected.
• max-samples—Maximum number of samples to keep.
Default Configuration
The sampling-interval default value is 3600 seconds and the max-samples
default value is 168.