Users Guide

Layer 2 Switching Commands 731
• detail—Displays additional information.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
The following example shows port monitor status.
console(config)#show monitor session 1
Session : 1
Admin mode : Disabled
Type : Local session
Source ports :
Both : Te1/0/10
Destination ports : Te2/0/20
IP access-group : a1
The following example shows the detailed status of the port based mirroring
session that is constrained to a local switch.
console(config)#show monitor session 1 detail
Session : 1
Admin mode : Disabled
Type : Local session
Source ports :
Rx only : None
Tx only : None
Both : Te1/0/10
Source VLANs :
Rx only : None
Source RSPAN VLAN : None
Destination ports : Te2/0/20