Users Guide

Layer 2 Switching Commands 937
Example
This example enables MVRP on port channel 1
console(config)#interface po1
console(config-if-Po1)#mvrp
mvrp global
Use the mvrp global command to globally enable MVRP. Use the no form of
the command to globally disable MVRP.
Syntax
mvrp global
no mvrp global
Default Configuration
By default, MVRP is disabled globally and on all interfaces.
Command Mode
Global Configuration mode
User Guidelines
MVRP is not compatible with GVRP/GMRP. Do not enable MVRP on
switches enabled for GVRP/GMRP.
MVRP propagates VLAN registration information to allow switches in the
network to dynamically learn and configure VLANs. Refer to IEEE Std.
802.1Q-2005 and IEEE Std. 802.1Qbe-2010 for further information. In
particular, MVRP must also be enabled on the individual interfaces to
become operational.
MVRP does not support configuration of default group filtering behavior.
MVRP does not support the optional Registrar Administrative Control for
VLANs.
If a VLAN is statically configured on an interface and MVRP requests
registration (dynamic creation) of the VLAN, it is deleted and added back as a
tagged static VLAN. If subsequently deleted by the operator, the VLAN is
dynamically created.