Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsEMC PowerSwitch N3100 Series
331332333334335336337338339340
Table Of Contents
Authentication, Authorization, and Accounting 333
Figure 10-5. Configure Dot1x Settings
5
Click Apply.
To reauthenticate a port:
1
Open the Dot1x Authentication page.
2
Click Show All.
The Dot1x Authentication Table displays.
3
Check Edit to select the Unit/Port to re-authenticate.
4
Check Re-authenticate Now.
5
Click Apply.
The authentication process is restarted on the specified port.
To reauthenticate multiple ports:
1
Open the Dot1x Authentication page.
2
Click Show All.
The Dot1x Authentication Table displays.
3
Check Edit to select the Units/Ports to re-authenticate.
4
To re-authenticate on a periodic basis, set Periodic Re-Authentication to
Enable, and specify a Re-Authentication Period for all desired ports.
5
To re-authenticate immediately, check Re-authenticate Now for all ports
to be re-authenticated.
6
Click Apply.
The authentication process is restarted on the specified ports (either
immediately or periodically).