CLI Guide

Security Commands 1070
6–Service-Type is set to 10 (Call-Check).
12–Framed-MTU—Port/switch MTU—header length (for example, 1500).
30–Called Station ID—MAC address of device (in xx:xx:xx:xx:xx:xx format).
31–Calling-Station ID—Switch MAC address.
60–CHAP-Challenge (if auth type is CHAP).
61–NAS-Port-Type (Ethernet 15).
87–NAS-Port-Id (e.g., Gigabitethernet 1/0/15)
The switch sends the following information to the RADIUS server for CHAP
Access-Requests:
1–User-Name—MAC address of MAB device.
2-User-Password—MAC Address of the MAB device (encrypted).
4–NAS-IP-Address—IP address of the switch.
5–NAS-Port—Our internal port number.
6–Service—Type is set to 10 (Call-Check).
12–Framed-MTU—Port/switch MTU—header length (for example, 1500).
30–Called Station ID—MAC address of device (in xx:xx:xx:xx:xx:xx format).
31–Calling-Station ID—Switch MAC address.
61–NAS-Port-Type (Ethernet 15).
87–NAS-Port-Id (e.g., Gigabitethernet 1/0/15)
The switch sends the following information to the RADIUS server for EAP
Access-Requests:
1–User-Name—MAC address of device.
4–NAS-IP-Address—IP address of the switch.
5–NAS-Port—Our internal port number.
12–Framed-MTU—Port/switch MTU—header length (for example, 1500).
30–Called Station ID—MAC address of device (in xx:xx:xx:xx:xx:xx format).
31–Calling-Station ID—Switch MAC address.
61–NAS-Port-Type (Ethernet 15).
The Calling Station ID is formatted per the attribute 31 command.